[ Advertisement ]
 
» homepage » machines » other
 

This advertisement does not exist anymore


Roland MDX 540A Milling Machine New

Roland MDX 540A Milling Machine New



SRP technology: Creates the most accurate prototypes for complex snap-fits Creates prototypes for functional testing and proves part manufacturability Handles a wide variety of materials and generates a smooth surface finish 400W DC Brushless motor with increased torque for fast, accurate prototypes Bundled, user-friendly CAM Software Handheld controller and virtual control panel make set up fast and easy Specialty MDX-540S and MDX-540SA models available for enhanced precision and repeat accuracy Optional 4th rotary axis and automatic tool changer Maximum 19.68" x 15.74" x 6.10" XYZ-Axis Travel Usable Materials Plastic, resin, wood and non-ferrous metals XYZ-Axis Travel 15.7(X) x 15.7(Y) x 6.1"(Z)[400 (X) x 400 (Y) x 155 mm (Z)] Loadable workpiece size with optional rotary axis (ZCL-540) * 7.0” Diameter x 14.6” Length [177.8mm Diameter x 370.8mm Length] Actual milling area is smaller Distance From Spindle Nose to Table Maximum 10" (254mm) Table Size 21.7(W) x 16.5"(D) [550(W) x 420mm (D)] Loadable workpiece weight At acceleration of 0.2G: maximum 26lb (12kg), 0.1G: 44lb (20kg), 0.05G: 44lb (20kg) XYZ-axis drive system AC servo motor, 60W Operating speed Maximum 295ipm (7.5m/min) Acceleration 0.2G, 0.1G, 0.05G Software resolution RML-1 mode: 0.0004"(0.01mm ), NC-code mode: 0.00004" (0.001mm) Mechanical resolution 0.00004” (0.001mm) Positioning accuracy +/-0.004"/12"(+/-0.1mm/300mm), under no-load conditions Repeat accuracy +/-0.0019"(+/-0.05mm), under no-load conditions Origin reproducibility (when the power is switched on/off) +/-0.0019" (+/-0.05mm) Spindle motor DC brushless motor, maximum 400W Spindle speed 400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering Tool chuck Tool holder format, Taper shank: JBS4002 15T Control command sets RML-1 and NC codes Interface USB (compliant with Universal Serial Bus Specification Revision 1.1) Power supply Voltage and frequency: AC 100 to 120 V/220 to 240 V +/-10%, 50/60 Hz Required power capacity: 7A (100 to 120V)/4A (220 to 240V) Power consumption Approx. 700W Acoustic noise level During operation (no cutting): 65dB (A) or less, during standby: 40dB (A) or less (according to ISO 7779) Dimensions Width x depth x height: 29.3 x 37.6 x 33.8" (745 x 955 x 858mm) Weight 249lb (109kg) Operating temperature 41 to 104F (5 to 40C) Operating humidity 35 to 80% (no condensation) Included items Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, Roland Software CD-ROM, User's Manual, Roland Software Guide, NC Code Reference Manual, and Automatic Tool Changer (Refer to the ZAT-540 specs below.) Automatic Tool Changer (ZAT-540) Number of tools housed 4 Maximum tool length 4.3” (110mm) Maximum tool diameter 0.4” (10mm) Maximum tool weight 0.77lb (350g) Tool-holder format Taper shank: JBS4002 15T Tool-selection method Direct-changing type, fixed-address specification Compatible compressed air 102 to 145 psi, 1.8CFM (0.7 to 1.0 MPa, 50 L/min or higher) Spindle speed 400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering Weight 15lb (6.8kg) (total weight including spindle, magazine, control box, etc.) Included items Control box, magazine unit, ATC spindle, air cylinder, base plate, Z-origin sensor, spacer, cap screws, hexagonal wrenches, retaining bands, cable retainers, and user's manual
 

Other


show: » All   » Auctions only   » ´Buy now´ only
All   » For Sale   » Requested
All   » New product   » Used product

Quick search this category only


» Extended search
Search in title only

Description

Action

Bids

Sort by pricePrice

Sort by dateDate

Views

Location

Pitney-Bowes Flowmaster 6x9 Inserter Refurbished For Sale » Pitney-Bowes Flowmaster 6x9 Inserter Refurbished For Sale
Pre-Owned
This unit has been refurbished. With 10x13 feeders for better control of the feeding, Converted to PLC w servo drive chassis and 6 feeders by Sensible Technologies. Auto calibrating double detect in each feeder. Gravity water fed sealing system (simi...
Used product  working properly For Sale - make bid Aug-31-2017 57 United States
(Minneapolis, Minnesota)
Automatic eyelet machine 10mm » Automatic eyelet machine 10mm
Full automatic eyelet machine for 10m eyelets, used.
We would like to sell our used taiwan made fully automatic eyelet machine. Ready to use, not need any refurbishment, any repair. It’s a very heavy duty industrial machine, not easy to damage (all iron parts). We can send 10mm nickel coated steel ey...
Used product  working properly For Sale buy now $ 1,316.92 Aug-16-2017 125 Hungary
(Jászberény)
Vibro hammer SVR 101 NF to work on a crane or piling rig » Vibro hammer SVR 101 NF to work on a crane or piling rig
Vibro hammer SVR 101 NF
High-frequency new vibro hammer SVR 101NF with power pack PP 1072 and the universal clamp SCN 350. It can be used in two ways - free hanging from a crane or leader guided with a piling rig. (For further information, please contact us) Vibro hammer SV...
New product  working properly For Sale buy now $ 439,372.40 May-28-2017 318 Poland
(Michalowie)
Vibro hammer SVR 50 NF to work on a crane or piling rig » Vibro hammer SVR 50 NF to work on a crane or piling rig
Vibro hammer SVR 50 NF
High-frequency new vibro hammer SVR 50NF with power pack PP 536 and the universal clamp SCN 165. It can be used in two ways - free hanging from a crane or leader guided with a piling rig. (For further information, please contact us) Vibro hammer SVR ...
New product  working properly For Sale buy now $ 233,454.00 May-28-2017 296 Poland
(Michalowie)
Vibro hammer SVR 25 NF to work on a crane or piling rig » Vibro hammer SVR 25 NF to work on a crane or piling rig
Vibro hammer SVR 25 NF
High-frequency new vibro hammer SVR 25NF with power pack PP 265 and the universal clamp SCN 120. It can be used in two ways - free hanging from a crane or leader guided with a piling rig. (For further information, please contact us) Vibro hammer SVR ...
New product  working properly For Sale buy now $ 156,833.20 May-28-2017 296 Poland
(Michalowie)
Vibro hammer SVR 40 VM to work on a crane or piling rig » Vibro hammer SVR 40 VM to work on a crane or piling rig
Vibro hammer SVR 40 VM
High-frequency new vibro hammer SVR 40VM with variable eccentric moment together with power pack PP 1072-V and the universal clamp SCN 350. It can be used in two ways - free hanging from a crane or leader guided with a piling rig. (For further inform...
New product  working properly For Sale buy now $ 452,541.60 May-28-2017 259 Poland
(Michalowie)
Vibro hammer SVR 30 VM to work on a crane or piling rig » Vibro hammer SVR 30 VM to work on a crane or piling rig
Vibro hammer SVR 30 VM
High-frequency new vibro hammer SVR 30VM with variable eccentric moment together with power pack PP 768-V and the universal clamp SCN 200. It can be used in two ways - free hanging from a crane or leader guided with a piling rig. (For further informa...
New product  working properly For Sale buy now $ 397,470.40 May-28-2017 294 Poland
(Michalowie)
Vibro hammer SVR 20 VM to work on a crane or piling rig » Vibro hammer SVR 20 VM to work on a crane or piling rig
Vibro hammer SVR 20 VM
High-frequency new vibro hammer SVR 20VM with variable eccentric moment together with power pack PP 428-V and the universal clamp SCN 165. It can be used in two ways - free hanging from a crane or leader guided with a piling rig. (For further informa...
New product  working properly For Sale buy now $ 251,412.00 May-28-2017 275 Poland
(Michalowie)
Vibro hammer SVR 16 VM to work on a crane or piling rig » Vibro hammer SVR 16 VM to work on a crane or piling rig
Vibro hammer SVR 16 VM
High-frequency new vibro hammer SVR 16VM with variable eccentric moment together with power pack PP 343-V and the universal clamp SCN 120. It can be used in two ways - free hanging from a crane or leader guided with a piling rig. (For further informa...
New product  working properly For Sale buy now $ 249,017.60 May-28-2017 284 Poland
(Michalowie)
Used vibro hammer SVR 25VM to work on a crane or piling rig » Used vibro hammer SVR 25VM to work on a crane or piling rig
Used vibro hammer SVR 25VM
High-frequency used vibro hammer SVR 25VM with variable eccentric moment together with power pack PP 551 and the universal clamp SCN 165 - year of manufacture 2016. It can be used in two ways - free hanging from a crane or leader guided with a piling...
Used product  working properly For Sale buy now $ 263,384.00 May-28-2017 254 Poland
(Michalowie)
1 2 3 4 5 6   
 
[ Advertisement ]
 
 
On DigitalPrintMarket.com you can also find...


Wide Format Printers Flatbed Printers Textile Printers Finishing Systems Other Machines Software
Solvent printers
Latex printers
UV printers
Water based printers
 
Agfa printers
HP printers
Mimaki printers
Oce printers
 
Reactive dye printers
Sublimation printers
T-shirt printers
Textile pigment printers
 
Laminators
Steaming devices
Die cutters
Cutting tables
 
Screen printing
Label printers
Embroidery machines
Scanners
 
Cutting Software
Pre-flight Software
Profiling Software
RIP Software
 
Press / Pre - Press Cutting machines Inks Proofing Software Service Spare Parts
CTP (Computer-to-Plate)
Digital presses
Offset presses
Proofing printers
Flatbed cutters
Roll cutters
Reciprocal cutters
Tangential cutters
Solvent inks
Textile inks
UV inks
Water based inks
CGS
EFI
GMG
EskoArtwork
Technical support
Profiling service
Training
Service agreements
Bulk systems
Dampers
Print heads
Tubes
Terms and conditions Privacy policy Disclaimer Copyright © 2008 - 2017 DigitalPrintMarket. All rights reserved.